Spindles & 3rd Bearing Supports

Exhaust
Custom Exhaust Pipes

Larger drive spindle = more top speed and less acceleration
Stock Sport™ spindle size is .575" diameter
Too large of a spindle may result in less top speed on less modified engines
Rider weight also affects spindle size and top speed
Spindle size is measured in inches, ex. .625" = 5/8 inch
O'rings are only for hardened long drives
Harder spindles wear tires quicker
Stainless spindles are the best compromise of spindle and tire wear

Go-Ped® Short Drives

Replaces stock drive on Sport™ and X-Ped™
Knurled for traction
Made from stainless steel
Stock drive size is .575"

*NOTE: To remove the stock spindle, it may be necessary to purchase a drive puller

Larger drive will increase speed and lose acceleration,
depending on riders weight and engine modifications done
.750" & .800" spindles may not fit with new tire,
this will vary from one Go-Ped to another

gpsd

Sport™ Long Drive Stainless

Must use long drive with 3rd bearing support
For use on Sport™ & X-Ped™ | Can be used on Liquimatic™, but it eliminates the clutch
Drives are NOT warranteed against wear or improper installation

NOTE: To remove the stock spindle, it may be necessary to purchase a drive puller.
*Spindles .750" and larger may not fit with a new tire, due to frame variances

gpld

Sport™ Long Drive Aluminum

NOTE: To remove the stock spindle, it may be necessary to purchase a drive puller.
*Spindles .750" and larger may not fit with a new tire, due to frame variances

gplda

Sport™ 3rd Bearing Support

Standard 3rd Bearing Support Kit

A must for jumping | Protects against crankshaft breakage
Must use long drive with 3rd bearing support | For use on Sport™ & X-Ped™
Can be used on Liquimatic™, but it eliminates the clutch

gpbsk

High Performance 3rd Bearing Support

Same as above but Uses high performance Japanese sealed bearing
Available in silver only
Hi-Perf 3rd Bearing Support Kit -

gpbskhp
Weight: 3.00 lbs

Click here for more product information

Replacement Standard Bearing

Replacement Standard Bearing for standard 3rd bearing support

Replacement High Performance Bearing

Replacement High Performance Bearing for High Performance 3rd Bearing Support

6202
Weight: 1.00 lbs

6x20mm Button Head Allen Bolt(3 required)

6x20mm Button Head Allen Bolt(3 required) Sport™ 3rd Bearing Support

6mm Nylock Nut(3 required)

6mm Nylock Nut(3 required) for Sport™ 3rd Bearing Support

6mm Fender Washer(3 required)

6mm Fender Washer(3 required) Sport™ 3rd Bearing Support

Spindle Bolt

Pick your size

Weight: 1.00 lbs

Bigfoot drive stainless

Click Here

Bigfoot drive stainless

gpbfd

Click here for more product information

Bigfoot™ Support Drives Stainless

Click Here

These drives are to be used with the ADA Bigfoot™ 3rd bearing support.
They can also be used as a replacement for the stock Bigfoot™ drive,
but doing so requires the use of a Sport™ drive spindle bolt (6 x 45mm) instead of the standard 6x80mm bolt.

The spindle remover bolt is 12 x 40mm.

These spindles have a diamond knurl pattern

gpbfsds

Click here for more product information

Bigfoot™ Support Drives Hard Anodized Aluminum

These spindles have a diamond knurl pattern

gpbfsd

Click here for more product information

Bigfoot 3rd bearing support

Bigfoot 3rd bearing support
includes: billet bracket, spring, hardware, drive bolt & puller
Works with stock clutch or with ADA Posi-Lock kit
Superbigfoot requires additional adaptor
Must use ADA Bigfoot™ support drive

bgbfbsk
Weight: 5.00 lbs

Posi-Lock kit

Posi-Lock kit
Only works with ADA Bigfoot™ 3rd bearing support)
Adjustable fixed tension
Locks engine to tire, eliminates clutch

gpbfbskl8
Weight: 2.00 lbs

Super Bigfoot Lock-out Adaptor

Super Bigfoot Lock-out Adaptor
Adaptor kit to make the stock Super Bigfoot lock-out
work with the ADA 3rd bearing support
Includes: 8x30mm hex bolt, 8mm lock washer,
8mm flat washer, & steel bushing

gpbfbsksbf
Weight: 1.00 lbs

Super Bigfoot Lockdown

Engine lock-down linkage for new style Bigfoot™ Go-Ped®. Fits yellow Bigfoot™ frame only(same as Super Bigfoot™). Also a replacement for the stock Super Bigfoot™ lock-down. Mounts to stock frame and stock engine mount. If used with ADA 3rd bearing, must also use SBF lock-out adaptor. Includes linkage and mounting bolts.

Fits:
Bigfoot - Super Bigfoot

gpbfeld
Weight: 1.00 lbs

Bearing - Bigfoot 3rd bearing support

Bigfoot 3rd bearing support replacement Bearing

6003-2rs

Bearing - Bigfoot HI PERF 3rd bearing support

Bigfoot HI PERF 3rd bearing support replacement Bearing

Spring, bigfoot support

Replacement spring for ADA Bigfoot 3rd bearing support